Allen TX Energy Code Multifamily: 2024 IECC Since September 2026, Local Amendments, and When to Study First

Allen, TX energy code for multifamily: the 2024 IECC under Ordinance 4230-7-26, effective September 26, 2026, the Section 3.10 amendments (no R408 credits, ERI 57 then 55), climate zone 3A, and when to study first.

November 19, 2026

If you are building multifamily in Allen, Texas, you are now on the 2024 International Energy Conservation Code with local amendments. The City Council adopted Ordinance No. 4230-7-26 on July 28, 2026, replacing Article III, Building Regulations, of the Allen Land Development Code with the 2024 International Codes and the 2023 National Electrical Code. The new codes took effect on September 26, 2026. Before that date, Allen was on the 2021 IECC. That puts Allen with its Collin County neighbors Plano, McKinney, and Frisco, plus Irving, Austin, College Station, and Round Rock, on the 2024 edition, while Dallas, Arlington, Denton, Grand Prairie, Houston, San Antonio, El Paso, New Braunfels, and Georgetown are on the 2021 IECC. A package priced in the summer of 2026 may already be on the wrong edition.

This page is the Allen Energy Code door for multifamily developers. For the statewide Texas commercial code path (the 2015 IECC floor, ASHRAE pairings, and why mid-rise is not HERS-first), see ASHRAE COMcheck Texas multifamily. For the Texas study door, see energy code feasibility study Texas. Other Texas city doors already live: Houston Energy Code multifamily, Austin Energy Code multifamily, Dallas Energy Code multifamily, San Antonio Energy Code multifamily, Fort Worth Energy Code multifamily, El Paso Energy Code multifamily, Corpus Christi Energy Code multifamily, Arlington Energy Code multifamily, Plano Energy Code multifamily, McKinney Energy Code multifamily, Frisco Energy Code multifamily, Denton Energy Code multifamily, Irving Energy Code multifamily, Grand Prairie Energy Code multifamily, College Station Energy Code multifamily, Round Rock Energy Code multifamily, New Braunfels Energy Code multifamily, and Georgetown Energy Code multifamily. Program, testing, and modeling context: ENERGY STAR Multifamily New Construction, blower door testing for multifamily buildings, and multifamily energy modeling.

What Code Applies in Allen Right Now

Per the City of Allen Adopted Building Codes page and the City's adopting ordinance (primary sources; confirm with the City before you file):

  • The City's Adopted Building Codes page says the City Council approved the 2024 ICC codes on July 28, 2026, effective September 26, 2026, and that all building and fire code permit applications received on or after that date are reviewed under the new codes. It lists the 2024 IBC, IECC, IFC, IFGC, IMC, IPC, ISPSC, and IRC, plus the 2023 NEC.
  • Ordinance No. 4230-7-26 amends Article III of the Allen Land Development Code in its entirety. Section 3.01 adopts the 2024 IECC "as amended by Section 3.10." Section 6 of the ordinance makes the code adoption effective September 26, 2026. The preamble notes that the codes went through regional review by the North Central Texas Council of Governments (NCTCOG) Regional Codes Coordinating Committee.
  • The City's 2026 Residential Permit and Construction Packet lists the 2024 IECC and asks for a signed Residential Energy Code Compliance Form plus an energy report showing compliance with the 2024 IECC.
  • Watch for stale documents. An older City adopted-codes sheet (revised March 2024) is still posted and lists the 2021 codes, and the online codified Article III may lag the new ordinance. The 2026 ordinance and the City's current page control for applications received on or after September 26, 2026. If your application landed before that date, ask the Building Official which edition applies.

Allen is in Collin County, climate zone 3A (warm, humid), the same zone as Plano, McKinney, Frisco, Dallas, Fort Worth, and Arlington.

What Allen Changes in the 2024 IECC

Section 3.10 of the Land Development Code holds the energy amendments. The ones that matter for multifamily:

  • Alternative compliance (C104.1.2 and R104.1.2 added). A building certified by an accredited national, state, or local energy efficiency program and found by the Energy Systems Laboratory to meet the code may, at the code official's option, be considered compliant, and ENERGY STAR certification is treated as compliant. On the residential side, every one- and two-family dwelling must still be tested for air leakage and duct leakage whichever path is used.
  • Dwelling unit ventilation (C403.7.4.1). A new exception says dwelling units using ventilation systems that meet the fan efficacy table in R403.6.2 are considered in compliance with this commercial section.
  • Commercial lighting control (C405.2.10) deleted. One commercial lighting control subsection is removed in its entirety.
  • No R408 additional efficiency credits. R401.2.1 is amended to drop its reference to R408, and Section R408 is deleted. Residential-scope buildings on the prescriptive path do not have to pick additional efficiency credits.
  • ERI targets set locally. For climate zone 3, the maximum Energy Rating Index (not including on-site power production) is 57 through August 31, 2028 and 55 on or after September 1, 2028.
  • Field-sealed outlet boxes allowed (R402.5.5). Boxes may be air-sealed in the field with caulk, tape, gasket, or another approved method in place of NEMA OS 4 boxes, sealed to the air barrier element being penetrated.
  • Slab edge and termites (R402.2.10 and Table R405.4.2(1)). Slab-edge insulation is not required where the code official designates moderate to heavy or very heavy termite infestation probability, and the performance reference design uses a maximum F-factor of 0.73 there.
  • Residential lighting controls (R404.2) deleted, plus two administrative deletions (R105.2.2 and R106.3) and new definitions for dynamic glazing and projection factor.

What Section 3.10 does not touch is just as useful. It does not amend the commercial energy monitoring or renewable energy sections of the 2024 IECC, so those apply as published in Allen. That is a real difference from next door: per ECC's live pages, Plano deleted the C405.15 renewable energy section from July 1, 2026, and McKinney made energy monitoring elective and cut its off-site renewable contract to one year. Do not carry a Plano or McKinney commercial package into Allen without rechecking those sections.

Inspections and Testing on Residential-Scope Work

The City's residential packet says Allen inspectors do not perform energy inspections. Energy inspections must be done by certified third-party inspectors, and the reports, with the inspector's certification number, go in the on-site packet for pickup at the City's final building inspection. The builder is responsible for getting those inspections before insulation, air sealing, and ducts are covered. The packet's compliance certificate covers duct leakage and air leakage testing by an independent third party. For garden-style and townhome multifamily, schedule the energy inspector and the testing sequence before framing starts, not at final.

Residential vs Commercial Split for Multifamily

Section 3.10 does not change the IECC scope, so the 2024 IECC draws the line as published: Group R-2, R-3, and R-4 buildings three stories or less above grade plane fall under the residential provisions. Taller apartment buildings, and the nonresidential portions of any building, fall under the commercial provisions, where the 2024 IECC commercial chapter or its ASHRAE 90.1-2022 alternative applies.

  • Garden-style and townhome projects. Three stories or less usually lands on the residential provisions. Compare prescriptive, performance, and ERI early, with the ERI at 57 for permits through August 2028, and line up third-party testing.
  • Mid-rise, podium, and mixed-use projects. Four stories and up, plus retail, amenity, lobby, corridor, and parking areas, follow commercial documentation, usually a COMcheck or an ASHRAE 90.1-2022 model. Price the envelope, ventilation, and the unamended renewable and monitoring sections early.

Proof From ECC Studies (Method, Not Allen Invoices)

ECC does not publish an Allen or Texas dollar-per-square-foot average, and we do not have an Allen energy-code invoice to present as your number. We cite other studies as proof of method, and we label them that way.

On our 267-unit Cromwell, CT study (CS68), two buildings up to six stories (272,036 square feet) were filed on IECC commercial provisions using ASHRAE 90.1-2019 Appendix G. The recommended all-electric tier came in at about $35.23 per square foot net and captured a $1,500 per unit Energize CT incentive ($400,500). Those are Connecticut outcomes, not Allen invoices. They show the order: lock the path and edition, rank the packages, then document the winner.

On a 112-unit Revere, MA study (CS57), a seven-story mixed-use building kept dwelling units on a Massachusetts Stretch HERS path and still called for a COMcheck report for all common and support areas, plus ASHRAE 62.1 ventilation calculations and lighting power density calculations. The recommended ductless package landed at about $42.52 per square foot net. Those are Massachusetts outcomes. We cite them as proof that mixed-use paperwork splits before modeling hours, not as an Allen price.

Common Mistakes on Allen Multifamily Energy Filings

  • Reusing a 2021 IECC package. Applications received on or after September 26, 2026 are reviewed under the 2024 IECC. REScheck runs, COMchecks, and envelope packages built for the 2021 edition need to be redone.
  • Trusting an old code sheet. An older City sheet still lists the 2021 codes. Work from the 2026 ordinance and the City's current Adopted Building Codes page.
  • Copying a Plano or McKinney commercial filing. All three cities are on the 2024 IECC in climate zone 3A, but Allen did not amend the renewable energy or energy monitoring sections the way its neighbors did.
  • Carrying R408 credit costs. Allen deleted the additional efficiency credits for residential-scope buildings. Do not price credit packages you do not need.
  • Waiting on City energy inspections. Allen inspectors do not perform them. Book a certified third-party energy inspector before work is covered.
  • Pairing the wrong ASHRAE year. The 2024 IECC commercial alternative is ASHRAE 90.1-2022, not 90.1-2019.
  • Buying COMcheck or REScheck hours before the path is locked. The study should settle the edition, residential vs commercial, the compliance path, the ERI target, and the commercial ASHRAE pairing, then the paperwork follows.

When to Study First

Settle the Allen path before anyone buys REScheck, COMcheck, ERI, or whole-building modeling hours:

  1. Confirm the site is inside the City of Allen and that your application date falls on or after September 26, 2026, which puts it on the 2024 IECC under Section 3.10
  2. Lock the residential vs commercial split (three stories or less for Group R-2 / R-3 / R-4 on the residential provisions, and commercial documentation for nonresidential areas)
  3. For residential-scope buildings, compare prescriptive, performance, and ERI (57 through August 31, 2028, then 55), with no R408 credits required
  4. Plan third-party energy inspections and air and duct leakage testing for every residential-scope building
  5. For each commercial portion, pick 2024 IECC commercial or ASHRAE 90.1-2022, account for the unamended renewable and monitoring sections, and model envelope, window, ventilation, and HVAC packages side by side for climate zone 3A
  6. Produce the compliance reports, performance models, and test records against the locked plan

That comparison is what a free feasibility study produces. For the Texas study method, see energy code feasibility study Texas. For how modeling works on apartment buildings in general, see multifamily energy modeling. If the path is already chosen and you need COMchecks, modeling, inspections, or testing, see ECC services.

Bottom Line

The Allen energy code for multifamily is the 2024 IECC with the Section 3.10 amendments, adopted by Ordinance No. 4230-7-26 on July 28, 2026 and effective September 26, 2026. The local amendments add an alternative compliance route, drop the R408 additional efficiency credits, set the climate zone 3 ERI at 57 and then 55 from September 2028, allow field-sealed outlet boxes, and add a dwelling unit ventilation exception. They leave the commercial renewable energy and energy monitoring sections as published, which sets Allen apart from Plano and McKinney. Energy inspections are third-party only. This is the Allen city-code door, not the statewide Texas code-path page, not the other Texas city doors, and not the Texas study door. Lock the edition, the split, and the compliance path first, then buy the paperwork that matches the plan.